36DaysOfType05

Hey Everyone,

As usual it's been quite some time since my last post, but I thought I'd update with some recent non-commercial work.

For it's fifth edition I decided to finally take part in 36 Days of type, and it was a great experience. I've created a portfolio section on my website with some of my creations which you can take a look at here: http://jamestf.com/#/36daysoftype05/

As i'm sure most of you are aware this is a competition that takes place on Instagram, my handle over there is @james.tf

I'm going to keep this one fairly short, and as usual if there are any questions about any of my letters don't hesitate to ask me any questions either here on via my email, contact@jamestf.com

Featured Posts:

#D by @james.tf

A post shared by 36daysoftype (@36daysoftype) on

#Y by @james.tf

A post shared by 36daysoftype (@36daysoftype) on

The Making of 'The Interstellar Medium' #6 - Saturn's Rings

Saturn is a cool planet. It has rings, over 60 moons and is made of gasses - this always amazed me from even a young age - I remember reading 'The Magic School Bus Explores the Solar System' and then playing the computer game on my fathers computer. The rings in particular really captivated me... But we're getting a little off topic here, lets get a little more into the shot itself.

But just before we do that, this shot is  actually somewhat accurate to how astrophysicists believe the rings may look. The shot takes place at the innermost 'D' ring of Saturn, which is the least dense ring.

So, this shot was to set the scene of Saturn, the next shot was fairly static so some movement here was necessary, so the rings felt like a good way to achieve this. The rings were made of many standard geometric shapes (cubes, spheres, pyramids) which were randomised in scale and vertex position, and then displaced via a displacement texture. These objects were then cloned, randomised, and had dynamics applied to them. This cause a lot of playback issues, but by separating each set of rocks (of which there were 10) into separate scene-files, I was able to work efficiently and get near real-time playback. I also rendered them seperately with depth passes as this left me more flexibility in post. Here is the C4D scene with all the ring ice (yes, they're made of ice, not rocks!) merged into one file.

The below image shows the ring texture (which was an alpha material) being used to create the shadow on Saturn's surface and atmpsphere.

In post I had to do a little masking and re-positioning of layers, and then added in a light near the top to highlight Pioneer's location. Click the image above for a more detailed view!

And there you have it! The full sequence will be available for viewing once the film is release. Thanks for reading!

The Making of 'The Interstellar Medium' #5 - The Asteroid Belt

I've done a lot of typing, and you've done a lot of reading - so here is a video of me sculpting an asteroid in Mudbox and doing some test compositing in After Effects, all to some repetitive music. This was part of my research into sculpting asteroid, and I ended up making 6/7 other asteroids for the final shot, however only 4 were used in the end.

Okay, so there is a little more reading... The final shot as two of the asteroids impacting each oth-  yes, I KNOW that asteroids in the Asteroid Belt aren't this close together (by a good 600,000 miles), it would have been a damned miracle if anything made it through the belt given it is around 1 AU wide. But rocks smashing into each other is pretty cool, so lets throw astrophysics out of the window for this one (again). Okay back to the more technical aspects - multiple impact rocks were made in C4D which consisted of mostly very low poly spheres which were then displaced further. I used a number of standard Cinema 4D emitters to sling rocks out from the impact zone in all directions, but with a slight emphases on the direction the asteroids are moving.

Pioneer just survives the impact and glides past the chaos, and using lens effects to emulate sunlight glinting off Pioneers golden foil, I was able to draw the viewers eye from the impact, to Pioneer, and back to the impact. Below is the compositing file, however I wont go into any detail here as it was a fairly straightforward colour correct job other than the flare keyframing and depth passes.

I was aiming for a look similar to the images taken by the Rosetta probe, in terms of visual style, and think the goal was met! Finally,  the bit everyone has been waiting for, the final image; and as always, the full sequence will be available for viewing once the film is finished! Thanks for reading.

The Making of 'The Interstellar Medium' #4 - Nebulae

Nebulae. Great word. This was by far the most challenging shot as fluid dynamics were something I was not that experienced with - specifically Turbulence FD (I had some previous experience with Maya's Fluid Effects). This shot was originally intended to be a matte painting, however I wanted to create something new instead of an already existing nebula, so instead opted for fluid effects. Not only was generating the Nebula a challenge, but compositing the shot was too difficult.

Now, before we get started, I am fully aware that if you were this close/inside a nebula you would not be able to see that you were inside one - but that's no fun, and I can change that with a computer! Alright, lets have a look at how this was done.

Above are the Cinema 4D scene files - in the top one you can see some of the settings I used. One of the most important settings for generating a nebula like simulation was the density dissipation. This meant the fluid would stay in dense clumps throughout the sim in certain areas based on a noise map that the fluid was emitted from. By using one light with soft shadows to save on render times, i was able to set it up in such a location that dark shadows would appear in the densest areas, emulating the effects seen in many emission nebulae, but more commonly in dark nebulae.

After colouring the nebula with a gradient in the density render settings, I was able to pick out dense areas and colour them differently, specifically darker alluding to their density. These image sequences were then sent into After Effects for post.

Both compositions had many adjustment layers and effects applied to them to tie the whole image together (The 'shy' button is your best friend in compositions like this!). For both compositions I rendered out a noise layer which was applied to a plane positioned within the nebula in 3D space. This plane was then screened onto the composition below and had its opacity reduced. This created the wispy plumes of dust/smoke seen around nebula - they rarely suddenly fall off straight into space - nor is the space directly behind them always pure black. To create a contrast from the rest of the film which features quite a similar colour palette, I wanted the film to go out with a super colourful image to surprise the audience. I was aiming for a similar effect with the close ups of the stars seen previously in the film a this point. (Remember to click the images above for a more detailed view!).

Above are two screenshots from the finished shot, and as usual, the final version will be available for viewing once the film is finished, and these images are subject to change!

The Making of 'The Interstellar Medium' #3 - Aldebaran

Aldebaran is a giant orange star in the constellation of Taurus. Pioneer 10 is on a trajectory in the general direction of this star, so it earned a place in my film. I already had one shot of a star in the film, so I needed to make this one particularly stand out.

I decided to create another close up shot, however this time using a particle system to generate huge solar flares across the surface, with Pioneer racing around the star (at a not so safe distance). Despite the clear scientific inaccuracies, I wanted something dramatic, and nothing is quite as dramatic as fireballs exploding from a gigantic orange star.

The particle simulations were done with X-Particles, you can see my set up below: 

I set up multiple emissions, one major flare arcing away from the surface, and a few other more subtle ones inside the Star. Using particle groups, I was able to separate each flare and create varied dynamics for each one. 

Below, you can see the procedural shader I set up - this consisted of various noise shaders animated in varied ways to get an interesting pattern across the Star's surface. I rendered this as a greyscale image and colourised it in After Effects. Each noise layer from the shader was rendered out individually, as well as a layer which was painted in bodypaint to mask areas where the particle flow was emitted from the Star.

The Pioneer model was also rendered out, and then composited in After Effects. You can see my After Effects scene file below:

Quite a difference right? As you can see I used many adjustment layers, which I can cover more extensively if there is any interest, but they mostly consist of various glow effects, lots of masking, blurs, lots of colour correction and finally distortions. 

And, as always, the animated version will be available for viewing once the film is released, for now, here is a screenshot of the composited shot!